Shanghai Coxin Technology Co.,Ltd is one of the best air-cooled water chiller CW-10~70 manufacturers and suppliers in China, welcome to buy discount and wholesale low price air-cooled water chiller CW-10~70 from our factory.
Product Name: Air-cooled Water Chiller
Model No.: CW-10~70
Product Introduction
A water chiller is an industrial water refrigeration system that cools a process fluid or dehumidifies air in commercial and industrial facilities. The water chiller is a complete water cooling system filled with refrigeration components including a compressor, condenser,evaporator, refrigerant pipes, coolant expansion reservoir, pumps and so on. Our air cooled water chiller offering a free cooling variant and a wide span of cooling capacities from 1.0 to 160KW, it is a good assistant to keep the machine cool and insure the machining accuracy.
Product Features
With cooling/heating capacity from 1.0KW~160KW, special requirement is workable;
With branded compressor like Copeland/Hitachi/Sanyo etc., running a high effiency of cooling/heating performance;
3. New micro-computer controller, Chinesse/English language display, fully automatic PLC based units, easy to operate and set;
4. "fixed temperature" and "room temperature homology type" two control modes, the user can choose according to actual needs;
5. Environment friendly refrigerant R-407C/R-134a/R-410A, available;
6. Multiple protection functions, with a variety of fault location display for easy maintenance. Provide passive contact alarm output terminals, coupled with machine control systems to form a closed loop control system, improve the safety of machine control systems;
7. Both cooling and heating functions, start heating when the oil temperature is below 10 ℃, stop heating when the oil temperature is up to 15 ℃;
8. Complete stainless steel of water circulation system, no worries of rust problem;
9. Compact structure, high efficiency and easy to maintain.
Product Application
Machinery, electronics, electroplating, metallurgy, construction, chemical, vacuum coating etc..
Product Parameters
Product Model |
CW-10 |
CW-15 |
CW-25 |
CW-35 |
CW-50 |
CW-70 |
|
Cooling Capacity(W) |
1000 |
1500 |
2500 |
3500 |
5000 |
7000 |
|
Heating Capacity(W) |
1000 |
1500 |
2500 |
3500 |
5000 |
7000 |
|
General Power Supply |
3N-50Hz-380V |
3P-50Hz-380V |
|||||
Total Power (W) |
CW-□ |
605 |
825 |
1020 |
1420 |
2300 |
2850 |
CW-□P |
1330 |
1550 |
1750 |
2140 |
3020 |
3570 |
|
CW-□PT |
1330 |
1550 |
1750 |
2140 |
3020 |
3570 |
|
Total Current (A) |
CW-□ |
2.8 |
4.0 |
5.0 |
6.8 |
4.6 |
5.8 |
CW-□P/PT |
4.1 |
5.5 |
6.5 |
8.4 |
6.5 |
7.5 |
|
Temp. Control Range |
Fixed Temp. Control Type 15~45℃/Differential Temp. Control Type(Room Temp.+T*℃) control accuracy ±1℃ |
||||||
Compressor |
Power Supply |
1P-50Hz-220V |
3P-50Hz-380V |
||||
Rated Power (W) |
510 |
705 |
885 |
1250 |
2030 |
2555 |
|
Circulating Flow(L /min) |
20-40 |
||||||
Pressure |
3~4bar |
||||||
Usage Condition |
Room Temp.(℃) |
5~50 |
|||||
Water Temp.(℃) |
5~55 |
||||||
Medium |
water, water solution and other un-corrosive solution |
||||||
Pipe Size(Female Thread) |
G3/8’’ |
G1/2’’ |
G1/2’’ |
G3/4’’ |
G3/4’’ |
G1’’ |
|
Tank Volume(L) |
12 |
15 |
25 |
35 |
45 |
60 |
|
Protection |
compressor overload protection*pump overload protection*high/low pressure protection*anti-freeze protection *motor anti-phase and default phase protection *level, flow measurement*malfunction alarm |
||||||
Note |
1. The above cooling capacity is based on the condition of ambient temperature 35℃, water inlet temperature 25℃. 2. There are two types of temperature controlling--fixed Temp. control type and differential Temp. control type. Users may choose suitable one according to the requirement. The lower limit value of both types are 15℃ and T*=0~±9℃. 3. CW-□: without water pump and tank; CW-□P: with water pump; CW-□PT with water pump and tank. 4. Heating capacity only for OR type with cooling/heating function, the heating capacity is based on the condition of ambient Temp. 13℃, water inlet temp. 13℃. 5. For any special requirement, pls feel free to contact us. |
Our Service
Cooling the heat!
We are professional at industrial cooling solutions, for industrial chillers(oil chiller, water chiller) we can delivery in 1~2 weeks; each unit of chiller is factory tested before delivery. Normally, the package is inner carton & outter plywooden case for exporting shipment; MOQ of 1pc is acceptable; 3D/CAD drawing and technical support also we can provide. Clients’ satisfaction is our pursuit!